PLEASE READ THIS FIRST

 First, here is the disclaimer I have been plastering all over these diagrams and anything related to them:

This is a fan-made diagram based on drawings graciously provided by Eric Barbour, owner of Metasonix. No support will be provided.

Do NOT pester Metasonix about these. You can ask me for help but I will not make any promises as to whether or not I will be able (or willing, depending on the moon phase and tides) to help. I drew these up using the drawings Eric posted on the Metasonix forum on Modwiggler, and I made them under the assumption that whoever may be building from them understands enough about tube circuitry to fill in the blanks on their own. 

In fact, I am just going to copy and paste the disclaimer from the old Audio Synthesis via Vacuum Tubes site:

"All these projects and designs should be considered dangerous if not lethal if not used safely. When working on projects based on these designs, use extreme care to ensure that you do not come into contact with mains AC voltages or high voltage DC. If you are not confident about working with mains voltages, or high voltages, or you are not legally allowed to work with mains voltages, or high voltages, you are advised not to attempt work on them. The author, host, and all people associated with these web pages disclaim any liability for damages should anyone be killed or injured while working on these projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages. The author, host, and all people associated with these web pages also disclaim any liability for projects, or projects based on these designs, or any other project or design presented on these web pages and any associated web pages when used in such a way as to infringe relevant government regulations and by-laws."